FUTABA T10PX Full Manual page 100

The channel limiter function limits the maximum servo movement. By superimposing mix
ing, the linkage can be protected by setting the limiter in case servo motion becomes unex
SHFWHGO\ ODUJH
Home screen
Tap to change page.
Channel limiter adjustment
(Preparation)
- Tap the travel button of the channel you want to set. Value input
buttons appear on the screen.
1
Use the [+] or [-] buttons to adjust the servo angle.
2
When finished, return to the Linkage menu screen by pressing the HOME button.
LINKAGE MENU
Channel Limiter
Menu screen
Menu-1
Tap to change page.
Linkage menu screen
Menu-2
Channel limiter
Tap to change page.
The number of chan-
nels varies depending
on the selected sys-
tem.
Adjust button
Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Limiter rate
0~145
Initial value: 145