FUTABA T10PX Full Manual page 178

Using the fuel down timer
(Preparation)
Select the "Fuel down timer" from the timer type list and tap.
1
(Alarm time setting)
Tap the value button of the "Alarm time".
Value input buttons appear on the screen.
Use the [+] and [-] buttons to set the time
amount.
Tap [Vibrate] and select the vibration pat-
tern of the alarm from 3 types of patterns
and disable (OFF).
(Pre-alarm setting)
Tap (ON) or (OFF) of pre-alarm and select
ON/OFF.
2
(Timer start/stop operation)
When the switch (Timer start) assigned by
switch select function is pressed, the timer
starts.
When the switch ("Timer start") is pressed
while the timer is operating, the timer is re-
set and simultaneously restarted. (Restart)
When you press the [Reset] on the screen
during timer operation, the timer stops.
- How to start by trigger operation.
Tap [OFF] of the trigger to display [Ready] and wait for the
trigger operation. When you operate the trigger to the forward
side, the timer starts. The stop is the same as when starting
with a switch.
3
(Timer reset operation)
With the timer stopped, press the switch
(timer reset) set by the Switch select func-
tion, or tap [Reset] on the screen. The timer
is reset with a beeping sound.
Alarm time
OFF, 1~99-minutes
Initial value: 5-minutes
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Pre-alarm time
OFF, ON
Initial value: OFF
- Tap (ON)/(OFF).
Grip vibrator type (pattern)
Inhibit(Off), Type 1,2,3
Initial value: Inhibit
- Tap (ON)/(OFF).
Start/Stop
Status display
Timer reset