FUTABA T10PX Full Manual page 107

Adjustment method for Curve
(Preparation)
-Tap the curve type and select [Curve].
1
[Curve rate adjustment ]
Tap [ ] [ ] to move the cursor line over the point. Tap the rate
setting value to adjust the curve rate of each point.
2
[Add and remove points ]
You can add points up to 21 points. Tap [
move the cursor line to the position where you want to add / delete
points, and tap [ON / OFF].
3
When finished, return to the Racing menu screen by press-
ing the HOME button twice.
Throttle curve
Screen change between throttle forward side curve and brake side curve.
You can move directly without returning the throttle (forward side) curve screen and the
brake curve screen to the "Curve" screen.
RACING MENU
] [ ] or [
Example
P1 :3%
P2 :5%
P3 :10%
P4 :16%
P5 :20%
P6 :40%
P7 :55%
P8 :68%
P9 :80%
Add points
- Select point with the [
buttons.
] [ ],
Add points
- Turn [ON]
Adjustment rate
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
] or [ ]
Remove points
- Turn [OFF]
Curve rate
0~100