FUTABA T10PX Full Manual page 125

2
("Trigger point" setup)
Tap the value button of the [Trigger point].
Value input buttons appear on the screen.
Use the [+] and [-] buttons to adjust the op-
eration point.
3
("Preset position" setup)
Tap the value button of the [Preset]. Value
input buttons appear on the screen. Use the
[+] and [-] buttons to set the preset position
of the throttle servo.
4
("Ready" setting)
To set "Ready" again, Tap [OFF] of "Sta-
tus", the display will change to [Ready] and
wait for trigger operation. Also, you can set
the switch to be in the [Ready] state in the
switch select function (Linkage menu).
5
When finished, return to the Racing menu screen by pressing the HOME button.
,Q W H 5HDG\ VWDWH LI W H W URWWOH WULJJHU LV RSHUDWHG WR W H SRVLWLRQ RI W H WULJJHU SRVL
WLRQ W H W URWWOH VHUYR PRYHV WR W H VHUYR RSHUDWLRQ SRVLWLRQ VHW LW SUHVHW ,W LV FDQ
FHOHG HQ W H W URWWOH WULJJHU LV UHWXUQHG
RACING MENU
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Trigger point
5~95
Initial value: 30
Adjust button
Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Preset position
0~100
Initial value: 0
Restart
Tap [OFF] to [Ready]