FUTABA T10PX Full Manual page 189

Using the ESC Link function
(Preparation)
-Connect the T10PX and ESC.
-Connect the battery to the ESC.
1
Turn the power on the transmitter. Accessory menu
ESC power switch to the ON position.
2
(ESC read)
Execute this function to read
the connected ESC type and
the data currently set at the
ESC. Tap the Read]. The con-
firmation screen wi ll be dis-
played. To execute, tap [Yes] to
hear an electronic sound and
finish setting. To cancel, select
[No] and tap it.
- "Reading succeeded" is displayed on the screen, and the ESC type and currently set contents are read.
- If "Failed" is displayed on the screen, communication with the ESC is not being performed usually. Check the
T10PX and ESC connection and the battery connection to ESC and the ESC power switch and repeat [Read].
3
(Writing to ESC)
Execute this function to write the setting data to the
ESC. Tap the [Write]; the confirmation screen is dis-
played. To execute, tap [Yes] to hear an electronic
sound and finish setting. To cancel, select [No] and
tap it.
- "Writing succeeded" is displayed on the screen, and the setting
data is written to the ESC.
- If "Failed" is displayed on the screen, communication with the
ESC is not being performed usually. Check the T10PX and ESC
connection and the battery connection to ESC and the ESC
power switch and repeat [Write].
- Different type ESC data cannot be written. If writing is attempted, "Failed" is displayed on the screen.
4
(Initialization)
Write the factory set ESC setting data to the con-
nected the ESC. Tap the [Reset]; the confirmation
screen will be displayed. To execute, tap [Yes] to
hear an electronic sound and finish setting. To can-
cel, select [No] and tap it.
- "Writing succeeded" is displayed on the screen, and then initial-
ize a setting data is written to the ESC.
- If "Failed" is displayed on the screen, communication with the
ESC is not being performed usually. Check the T10PX and ESC
connection and the battery connection to ESC and the ESC
power switch and repeat [Write].
MC link menu is displayed. Set the