FUTABA T10PX Full Manual page 104

Carve adjustment
(Preparation)
-Tap the curve type and select [Curve].
1
[Curve rate adjustment ]
Tap [ ] [ ] to move the cursor line over
the point. Tap the rate setting value to adjust the
curve rate of each point.
2
[Add and remove points ]
You can add points up to 21 points. Tap [
or [ ] [ ], move the cursor line to the
position where you want to add / delete points,
and tap [ON / OFF].
3
[Combination/Separate]
Curves can be set independently on the left and right sides of the
steering.
Combination
[ ]
RACING MENU
] [ ]
Separate
[ ]
Add points
- Select point with the [ ] or [
buttons.
Add points Remove points
- Turn [ON] - Turn [OFF]
Adjustment rate
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Curve rate
0~100
]