FUTABA T10PX Full Manual page 167

How to change start slot and set empty slot
1
(Start slot selection)
Tap [Slot], the list of sensors that can be reg-
istered in the start slot, will be displayed. Sen-
sors that cannot be changed are not displayed.
2
(Sensor selection)
From the sensor list, tap the sensor you want
to register in the start slot. To set as an empty
slot, tap [---------]. This completes the change.
3
When finished, return to the Sensor list screen by pressing the HOME button.
Start slot selection
- Tap the slot
Sensor selection
- Tap the sensor