FUTABA T10PX Full Manual page 185

Display data list
1
The type and data of the loaded servo are displayed. Since there are two setting items,
change the page as follows.
'R QRW SOXJ LQ RU GLVFRQQHFW VHUYRV RU FRQQHFW RW HU VHUYRV
HUH GDWD DV UHDG E\ 5HDG %H VXUH WR FRQQHFW W H VHUYR LQ W H VWDWH
or [Reset] is nished, or press the HOME button to access the accessory menu screen.
7 H ORDGHG GDWD FDQQRW EH ULWWHQ WR DQRW HU VHUYR
SR mode setting (Wired only)
1
(Writing to the servo)
Tap the [SR mode] or [Normal mode] of the
SR mode setting. A confirmation screen of
"Notes on SR setting" is displayed, so read
carefully and tap [N ormal mode] or [ SR
mode].
- When [Normal mode] is selected, "Writing succeeded"
is displayed on the screen, and the setting data is writ-
ten to the servo.
- If "Failed" is displayed, communication with the servo is
not performed usually. Check the connection between the T10PX and the servo, and then execute the write oper-
ation again.
2
(When SR mode is selected by writing to the servo)
In the confirmation screen of "Notes on SR setting", tap
[SR mode], the screen for selecting the SR type is dis-
played. Three different SR modes are prepared. (Please
repeat the test and choose the type. )
- "Writing succeeded" is displayed on the screen, and the setting data
is written to the servo. If "Failed" is displayed, communication with
the servo is not performed usually. Check the connection between the T10PX and the
servo, and then execute the [Write] operation again.
- For the servo set to SR mode, affix the supplied SR label so that SR mode can be
reconized.
Do not connect any servos that are on SR mode to a receiver via
S.BUS/S.BUS2 terminal. You cannot use an SR servo in the SBUS/
S.BUS2 ports, as they are not compatible with SR mode. The SR
servo can be damaged if it is connected to the S.BUS/S.BUS2 ports.
When the connected servo
type is not compatible with
t h e SR m o d e, "U n s u p-
po r ted Nor m al mode " is
displayed
LOH NHHSLQJ W H VFUHHQ
HUH :ULWH
The type of servo and
the set SR type are dis-
played.