FUTABA T10PX Full Manual page 201

*\UR GDWD FDQ EH V LWF HG LW W H SXV V LWF RU WULP OHYHU GLDO RI W H WUDQVPLWWHU 8S
WR J\UR GDWD OVR LW LV SRVVLEOH WR F DQJH J\UR GDWD DFFRUGLQJ WR W H FRQGLWLRQ RI W H
WUDQVPLWWHU 8S WR J\UR GDWD
- Connect the gyro to the S.BUS2 terminal of the receiver.
- The gyro mixing function must be enabled.
When switching with the push switch
1
On the Gyro mixing 1/2 screen, set the function to ON.
2
On the Switch select screen, select the switch you want to use for data switching.
3
On the function selection screen, assign the gyro data to be used from [Gyro data 1] to [Gyro
data 5].
Gyro mixing screen
When switching with the Trim/Dial
1
On the Gyro mixing 1/2 screen, set the function to ON.
2
On the Trim/Dial select screen, select the switch you want to use for data switching.
3
On the function selection screen, assign the [Gyro data].
Gyro mixing screen
Gyro Data Switching Function
Switch select
1/2
Trim/Dial select select
1/2
screen
screen