FUTABA T10PX Full Manual page 61

Update method
1
Select the recei ver to update on the "Receiver update"
screen.
- Only the displayed receiver can be updated with T10PX.
2
Hold down the Link switch first, and turn ON the receiver.
After the LED flashes red once, release the Link switch and
then press it again.
As you continue holding down the Link switch, the LED starts
flashing red and green. (Once flashing Red and Green, the
initial process is complete. )
- If red and green do not turn on at the same time, please start over from
the beginning.
3
Tap the "Update" button on the screen. The update will
start. A progress bar will be displayed indicating the
progress. The LED of the receiver turns green, and it
blinks green for a moment every time it accepts data
from the T10PX.
- Do not turn off the power of T10PX while updating.
4
When the update is completed, a message is displayed on the screen, and the LED of the
receiver stays flashing green. Please turn off the power of the receiver.
Please check the operation before running (cruising).
5
When finished, return to the System menu screen by pressing the HOME button.
(
,I DQ HUURU GLVSOD\ DSSHDUHG UHLQVWDOO W H XSGDWH IURP W H EHJLQQLQJ
7 H UHFHLYHU LV QRW LQ W H XSGDWH DLW VWDWH
7 H FDEOH LV GLVFRQQHFWHG
- The power has been turned o
7 H PLFUR 6' FDUG LV QRW LQVHUWHG LQ W H 7 3
7 HUH LV QR GDWD RQ PLFUR 6' FDUG
Push switch
(Link switch)
LED