FUTABA T10PX Full Manual page 148

These functions allow you to apply mixing between the steering, throttle, and auxiliary
channel. It is possible to assign telemetry data to the mixing master.
Additional Functions
: HQ W H VWHHULQJ RU W URWWOH F DQQHO LV W H PDVWHU F DQQHO W H F DQQHO W DW DSSOLHV
mixing), trim data can be added. (Trim mode)
- The mixing mode selection. (Master mixing mode)
- The master channel mixing center point (the point at which the direction changes) can
be o set. (O set function)
Movement of the slave channel side
7 H PRYHPHQW RI W H PDVWHU F DQQHO VLGH LOO LQFOXGH PRYHPHQW RI W H VODYH F DQQHO
VLGH
When the trigger ratio was set to 100:0
When the trigger ratio (Linkage menu→Throttle mode) is set to 100:0, brake operation
stops. When the master channel is set to throttle, mixing operates only at the " 5DWH
IRU DUG " VLGH ,W GRHV QRW RSHUDWH DW W H "5DWH % EUDNH " VLGH
Menu screen
Home screen
When the number of channels is insu
cient, cancel the other mixing.
Program Mixing (1, 2, 3, 4, 5 )
Menu-1 Menu-2
On page 1, the setting screen such as the curve, mixing
rate adjustment screen, page 2, mixing ON/OFF, etc. is
displayed.
Program mixing