FUTABA T10PX Full Manual page 177

Using the Up timer
(Preparation)
Select the "Up timer" from the timer type list and tap.
1
(Alarm time setting)
Tap the value button of the "Alarm time".
Value input buttons appear on the screen.
Use the [+] and [-] buttons to set the time
amount.
Tap [Vibrate] and select the vibration pat-
tern of the alarm from 3 types of patterns
and disable (OFF).
(Pre-alarm setting)
Tap (ON) or (OFF) of pre-alarm and select
ON/OFF.
2
(Timer start/stop operation)
When the switch (Timer start) assigned by
switch select function is pressed, the timer
starts. When you press the switch (Timer
start) or [Start]/[Reset] on the screen dur-
ing timer operation, the timer stops.
- How to start by trigger operation.
Tap [OFF] of the trigger to display [Ready]
and wait for the trigger operation. When
you operate the trigger to the forward side,
the timer starts. The stop is the same as when starting with a
switch.
3
(Timer reset operation)
With the timer stopped, press the switch
(timer reset) set by the Switch select func-
tion, or tap [Reset] on the screen. The
timer is reset with a beeping sound.
Alarm time
OFF, 1~99-minutes
Initial value: 5-minutes
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Pre-alarm time
OFF, ON
Initial value: OFF
- Tap (ON)/(OFF).
Grip vibrator type (pattern)
Inhibit(Off), Type 1,2,3
Initial value: Inhibit
- Tap (ON)/(OFF).
Start/Stop
Status display
Timer reset