FUTABA T10PX Full Manual page 65

3
(Copy destination model selection)
Tap the "Copy to" [model name], select the
model list so it will tap. The source model is se-
lected, and the model list is closed.
-The model currently in use cannot be selected.
-Since the copy destination cannot be overwritten when it
is in a microSD card, a model list is not displayed, and the
model is saved directly to the microSD card.
4
(Copy execution)
Tap the [Copy]. The confirmation message
"Are you sure" appears. To execute the copy,
tap [Yes] and to cancel copy, select [No]. When
the copy destination model name becomes
the same name as the copy source, copying is
complete.
5
When finished, return to the Model menu screen by pressing the HOME button.
The microSD card storage destination
When a microSD card is installed in the T10PX, a folder called "Futaba" is created, and folders
called "LOG" and "MODEL" are created in it. The "MODEL" folder contains the model data.
When the T10PX model data is copied, and the copy source data is se-
lected from the model data stored in the microSD, a model list like that
shown at the left is displayed.
Copy destination
Tap to select from the list
Copy execution
Tap the [Copy]
Model data