Quectel SG560D Series Hardware Design page 22

Transmitting Power
5G NR Features
LTE Features
UMTS Features
5
HPUE only supports single carrier.
6
Uplink 2 × 2 MIMO is support ed only in 5G TDD SA mode.
7
5G NR FDD bands only support 15 kHz SCS. 5G NR TDD bands only support 30 kHz SCS.
SG560D_Series_Hardware_Design
⚫
ANT_WIFI/BT, ANT_WIFI_MIMO(SG560D-WF)
⚫
Class 4 (33 dBm ± 2 dB) for EGSM900
⚫
Class 1 (30 dBm ± 2 dB) for DCS1800
⚫
Class E2 (27 dBm ±3 dB) for EGSM900 8 -PSK
⚫
Class E2 (26 dBm ±3 dB) for DCS1800 8 -PSK
⚫
WCDMA bands: Class 3 (23 dBm ±2 dB)
⚫
5
LTE HPUE band (B41): Class 2 (26 dBm ± 2 dB)
⚫
Other LTE bands: Class 3 (23 dBm ± 2 dB)
⚫
5
5G NR HPUE bands (n41/n77/n78/n79): Class 2 (26 dBm +2/-3
dB)
⚫
Other 5G NR bands: Class 3 (23 dBm ± 2 dB)
⚫
Supports 3GPP Rel-15 FDD and TDD
⚫
Supported modulation types:
– Uplink: π/2-BPSK, QPSK, 16QAM, 64QAM and 256QAM
– Downlink: QPSK, 16QAM, 64QAM and 256QAM
⚫
Supports Multi-User MIMO
– Uplink: 2 × 2 MIMO
SG560D-CN: n41/n78/n79
SG560D-EU: n41/n77/n78
– Downlink: 4 × 4 MIMO :
SG560D-CN: n1/n41/n78/n79
SG560D-EU: n1/n3/n7/n38/n40/n41/n77/n78
⚫
Supports SCS 15 kHz and 30 kHz
⚫
Supports SA and NSA operation modes
⚫
Supports Option 3x, Option 3a, Option 3 and Option 2
⚫
Maximum transmission rate:
– NSA: 2.5 Gbps (DL)/ 550 Mbps (UL)
– SA: 2.1 Gbps (DL)/ 900 Mbps (UL)
⚫
Support 3GPP Rel-15 FDD and TDD
⚫
Supports 1.4/3/5/10/15/20 MHz RF bandwidth
⚫
Supports Multi-User MIMO
– Downlink: 4 × 4 MIMO :
SG560D-CN: B1/B41
SG560D-EU: B1/B3/B7/B38/B40/B41/B42
⚫
Supports modulation types:
– Uplink QPSK, 16QAM, 64QAM and 256QAM
– Downlink QPSK, 16QAM, 64QAM and 256QAM
⚫
Maximum transmission rate: 1.2 Gbps (DL)/ 200 Mbps (UL)
⚫
Supports 3GPP Rel-9
⚫
Supports QPSK, 16QAM and 64QAM modulation
Smart Module Series
6
:
7
21 / 134