Quectel SG560D Series Hardware Design page 20

Operating System
Power Supply
SMS
LCM Interface
Camera Interfaces
2
Video Codec
2
Audio Codec
3
Audio Interfaces
(U)SIM Interfaces
ADC Interfaces
Real Time Clock
USB Interfaces
2
Audio codec and video codec listed in this table are dedicated for codec inside the CPU.
3
An external codec should be added via I2S interface when audio output function is needed.
SG560D_Series_Hardware_Design
Android 12
⚫
Supply voltage: 3.55–4.4 V
⚫
Typical supply voltage: 4.0 V
⚫
Text and PDU mode
⚫
Point-to-point MO and MT
⚫
SMS cell broadcast
⚫
SMS storage: ME by default
⚫
Supports one group of 4-lane MIPI_DSI, up to 2.5 Gbps/lane
⚫
FHD + (1200 × 2520 ) @144 fps based on MIPI standard
⚫
Supports Wi-Fi miracast 4K @ 60 fps
⚫
Supports four groups of 4-lane MIPI_CSI, up to 2.5 Gbps/lane
⚫
Supports up to 4 cameras
⚫
3 × ISP : up to 3 × 27 MP @ 24 fps or 3 × 22 MP @ 30 fps; 36 MP +
27 MP @ 24 fps or 36 MP + 22 MP @ 30 fps; 36 MP @ 30 fps
⚫
Video decode: up to 4K @ 60 fps for H.264/H.265/VP9
⚫
Video encode: up to 4K @ 30 fps for H.264/H.265
⚫
Video decode and encode: 1080P @ 60 fps decode +
1080P @ 60 fps encode or 4K @ 30 fps decode + 1080P @ 30 fps
encode
⚫
EVRC, EVRC-B, EVRC-WB, G.711, G.729, PCM, EVS
⚫
GSM-FR, GSM-EFR, GSM-HR
⚫
AMR-NB, AMR-WB, QCELP
Three digital microphone inputs
⚫
Two (U)SIM interfaces
⚫
Supports 1.8/2.95 V (U)SIM card
⚫
Supports Dual SIM Dual Standby by default
⚫
Four general-purpose ADC interfaces
⚫
Supports up to 15-bit resolution
Supported
Supports two USB interfaces: USB0 and USB1
USB0 function:
⚫
Compliant with USB 3.1 Gen 1 and USB 2.0 specifications, with
transmission rates up to 5 Gbps on USB 3.1 and 480 Mbps on USB
2.0
⚫
Supports USB OTG
⚫
Used for AT command communication, data transmission, software
debugging, firmware upgrade and voice over USB
USB1 function:
⚫
Compliant with USB 2.0 specifications, with transmission rate up to
Smart Module Series
19 / 134