Quectel SG560D Series Hardware Design page 21

DisplayPort Interface
PCIe Interface
SD Card Interface
4
UART Interfaces
4
SPI Interfaces
4
I2C Interfaces
I2S Interfaces
Bluetooth Features
GNSS Features
Antenna Interface
4
For details about the multiplexing and conflict relationships of UART, I2C and SPI interfaces, see Table 23.
SG560D_Series_Hardware_Design
480 Mbps
⚫
Only support host mode (external VBUS power supply is needed)
⚫
Supports DisplayPort 1.4 function through USB0_SS1 and
USB0_SS2
⚫
Supports up to 4K (3840 × 2160) @ 60 fps
⚫
USB 3.1 and DisplayPort 1.4 can work concurrently
Supports 2-lane PCIe Gen 3, up to 8 Gbps
⚫
Supports SD 3.0 protocol
⚫
Supports 1.8/2.95 V SD card
⚫
Supports SD card hot-swap
Supports up to eleven groups of UART interfaces, two of them are
default configurations and nine of them can be multiplexed from other
interfaces
⚫
Default UART interfaces: UART and DBG_UART
– UART: 4-wire UART interface, supports RTS and CTS hardware
flow control, up to 4 Mbps
– DBG_UART: 2-wire UART interface, dedicated for debugging
⚫
For details about nine UART interfaces that can be multiplexed from
other interfaces, see Table 23
Supports up to ten groups of SPI interfaces, one of them is default
configuration and nine of them can be multiplexed from other interfaces
⚫
The default SPI supports master mode only
⚫
For details about nine SPI interfaces that can be multiplexed from
other interfaces, see Table 23
Supports up to sixteen groups of I2C interfaces
⚫
Five of them are dedicated I2C interfaces used for camera and
sensor peripherals
⚫
Three of them are generic I2C interfaces that can be used for TP
and NFC peripherals
⚫
For details about eight I2C interfaces that can be multiplexed from
other interfaces, see Table 23
Supports up to five groups of I2S interfaces
⚫
Two I2S interfaces are default configurations
⚫
For details about three I2S interfaces that can be multiplexed from
other interfaces, see Table 24
⚫
Supports Bluetooth Core Specification Version 5.2
⚫
Supports Bluetooth Classic & BLE
GPS/GLONASS/BDS/Galileo/NavIC/SBAS/QZSS, L1 + L5
⚫
ANT0, ANT1, ANT2, ANT3
⚫
ANT_GNSS
Smart Module Series
20 / 134