How Do I Route Only Specific Monitored Channels To The Analog Xlr Outputs; Select? How Would I Configure Different Outputs For Source Select Choices; How Do I Keep The Internal Speakers Muted And Have Audio Only On The Analog Xlr Outputs - Wohler eAMP1-S8-DA User Manual

How do I route only specific monitored channels to the Analog
XLR outputs?
You may route specific channels as shown below. Here Audio Meter channels 9, 11,
13, and 15 are routed to the left analog XLR output and Audio Meter channels 10,
12, 14, and 16 are routed to the right analog XLR output. Unchecked channels are
not routed. Make sure the Speaker Mix selection is turned off to enable this
selection.
The optional Global Output Routing feature works great. But what
if we don't want to create any Presets and want to monitor audio
only using Source Select? How would I configure different outputs
for Source Select choices?
Use the Global Output Routing settings to determine how the outputs are
configured for source select options.
The Global Output Routing feature allows channels to be routed or combined and
routed to various destinations. For example, channels 1 to 8 can be routed to AES
outputs, while channels 9 to 16 can be routed to Analog XLR outputs:
How do I keep the internal speakers muted and have audio only
on the analog XLR outputs?
In the Global Output Routing configuration, do not select any Speaker
Headphone checkboxes for any meter channels as shown below, and then select
the desired meters for Analog XLR. In this way, the internal speakers will always be
muted, but the audio will appear on the Analog XLR outputs (for amplified external
Page 65
eAMP1-S8-DA