Wohler eAMP1-S8-DA User Manual page 15

1ru multi-channel audio monitor
Table of Contents

Advertisement

functioning, or wait 15 seconds for it to time out.
6. Selection Area: Touching the meters of any channel pair will let you
mute, un-mute, or solo the associated channel(s). Colored boxes
surrounding the channel pair or channel indicate what operation is being
performed. The following describes each function:
a. Mute / Un-Mute Selection: The Channel Label is bright green for
b. Channel Solo: (Method 1) Touch for two seconds any channel you
c. Channel Solo: (Method 2) Rotating the Channel control will move
7. Phase Indicators: At the bottom of each channel pair is a Phase
Indicator. The indicators light a dull green if the channels in the pair are
in phase or bright red if they are out of phase. Set which Phase Indicators
appear using the Phase Config Menu or with the System Preferences:
Phase Indicator Configuration tab in the Wohler Web GUI.
8. Menu Selector: Touching the Menu Selector opens the menu used to
set up preferences for operation. Refer to the Menu / Option
Touchscreen section of this chapter.
eAMP1-S8-DA
each channel that is unmuted. Muting and un-muting by touching is
an alternate action function. Multiple channels may be unmuted at
once. Typically, when the eAMP1-S8-DA is first powered, all of the
channels are muted.
would like to solo. A blue box will then surround the channel and
that will be the only one you hear. Any white boxes will disappear
and any bright green Channel Labels will dim. Touching another
channel will then move the blue box to it, and it will be soloed.
Touch again to return the combination of monitored channel pairs
to the way they were before you soloed the channel.
a white selection box from channel to channel. Press the Channel
control to solo the selected channel. That channel alone will then be
surrounded by a blue box and it will become the only channel being
monitored. Press the Channel control again or touch the channel
surrounded by the blue box to undo the solo and return the
combination of monitored channel pairs to as it was before you
soloed the channel.
Page 15

Advertisement

Table of Contents
loading

Table of Contents