Wohler eAMP1-S8-DA User Manual page 13

DA. Refer to Figure 2-4 for the pinout of this connector.
6. Balanced Analog DB-25 Outputs: This DB-25 female connector outputs
8 channels of +10dBu broadcast level balanced audio. The source of these
signals is the monitored audio channels as shown on meters 1 - 8. If the
OPTe Package and the OPTe Output Routing option are purchased, these
output channels may be sourced by any selected input channels. Tascam
cables may be used, and can be purchased by contacting Wohler Sales.
Refer to Figure 2-3 for the pinout of this connector.
Note: PCM channels marked as data channels (such as those containing
encoded Dolby streams) are automatically muted from being sent out to the
external amplifier and speakers.
Note: When these outputs are used to connect to an external amplifier and
speakers, the external amplifier should be muted whenever the eAMP1-S8-
DA products are being powered up or powered down.
7. Balanced Analog DB-25 Inputs: This DB-25 female connector inputs 8
channels of up to +10dBu broadcast level balanced audio. These signals
are monitored on meters 1 - 8 by default. Tascam cables may be used,
and can be purchased by contacting Wohler Sales. Refer to Figure 2-5 for
the pinout of this connector.
Figure 2-5: Analog DB-25F Input and Output Connections
eAMP1-S8-DA
Figure 2-4: Analog XLR-M Output Connections
Pair 1
L R L
G G G
N/C
13 12 11 10 9
25 24 23 22
Page 13
Pair 2 Pair 3
R L R
G G G
8 7 6 5 4
21 20 19 18 17
Pair 4
L R
G G
3 2 1
16 15 14