Speaker Options - Wohler eAMP1-S8-DA User Manual

Speaker Options

Touching the Speaker Options selection on the Unit Settings Menu screen
proceeds to the Speaker Options screen. The controls on this screen affect
various characteristics of the monitored audio as heard on the eAMP1-S8-DA. This
screen is shown in Figure 2-19.
The controls function as follows:
1. Volume Reference: The Volume Reference setting controls the
attenuation level of the internal speakers. The value ranges from 0 to -255
dB. 0 results in full volume and -255 causes the speakers to be muted.
2. Treble: This tone control adjusts the high frequency speaker audio response
from -12 dB to +12 dB. Lowering Treble compensates for high frequency
pre-emphasis or removes sibilance effects. Increasing Treble will add
"sizzle" to the sound and bring high-pitched sounds out of the mix. The
control can be touched and moved left or right to adjust in 2 dB increments.
After touching the Treble control, the Channel knob can also be turned to
make the adjustment.
3. Bass: This tone control adjusts the low frequency speaker audio response
from -12 dB to +12 dB. Lowering Bass will unmask midrange band sounds,
while increasing Bass will make the sound "fatter". The control can be
touched and moved left or right to adjust in 2 dB increments. After touching
the Bass control, the Channel knob can also be turned to make the
adjustment.
4. Set to Flat: Touching this button will set the Treble and Bass controls to
their midpoint, resulting in a flat response with 0 dB increase or decrease in
treble and bass response.
Touch Back to exit this screen.
eAMP1-S8-DA
Figure 2-19: Speaker Options Screen
Page 25