Chapter 1: Installation; Introduction; Overview; Safety - Wohler eAMP1-S8-DA User Manual

CHAPTER 1: Installation

Introduction

Overview

The eAMP1-S8-DA Audio Monitor is a 1RU multichannel multi-source audio monitor,
with AES inputs and analog inputs. These and the associated other eAMP1-Series
monitors allow the customer to select a model with the exact channel and input
source capabilities needed for an economical cost.
The eAMP1-S8-DA is compact and simple to operate, with straightforward controls.
It has a wide touch screen LCD display providing high resolution level meters. Any
audio channels (or channel pairs) from any audio source stream may be monitored
from the inputs that the particular model is configured with. In future firmware
release, Dolby
purchase of the OPT-DOLBY and OPTe Package options. Any audio channels (or
channel pairs) from any audio source stream may be monitored from its inputs. 8
channel meters can be displayed.
With the purchase of the OPTe Package option, monitoring setups can be created
and configured using local menus and a web browser over a network connection to
the integral web server of the eAMP1-S8-DA. The web server will also allow you to
view the audio meters remotely.

Safety

Instructions

1. Read, keep, and follow all of these instructions; heed all warnings.
2. Do not use this equipment near water.
3. Use only a dry cloth to clean the equipment.
4. Do not block any ventilation openings.
5. Do not install near any heat source such as a radiator, heat register, amplifier, or
stove.
6. Do not attempt to plug the unit into a two-blade outlet (with only two prongs of
equal width).
Important:
By design, the supplied AC mains power cord will only plug into a
three-prong grounded outlet for your safety. If the plug does not fit
into the outlet, contact an electrician to replace the obsolete outlet.
7. Protect the power cord from being walked on or pinched, particularly at plug
connection on the equipment and at the socket.
8. Use only the attachments/accessories specified by the manufacturer.
9. Unplug the equipment during lightning storms or when unused for long periods
eAMP1-S8-DA
®
D, DD+, and E bitstreams will be able to be monitored with the
Page 6