Wohler eAMP1-S8-DA User Manual page 77

Software Version screen. To cancel the upgrade at this point for any
reason, touch Back. To proceed, touch the software version entry in the
Software Version screen. A screen will appear, as shown in Figure A-3.
6. To proceed, touch Yes. To back out, touch No. After you touch Yes, the
screen will change, as shown in Figure A-4. The screen will display "Software
Upgrade in Progress" until the upgrade is complete.
After the software update starts, the text on the left screen will change
periodically to indicate the progression of the upgrade. The upgrade may take 5
minutes or more, after which the eAMP1-S8-DA will restart. After the system
has completed its restart cycle and is once again operational, you may then
remove the flash drive.
eAMP1-S8-DA
Figure A-3 - Upgrade Verify
Software Upgrade
Are you sure?
?
Do you want to Update your
Software Version
System to 1.0.1?
Wohler iAM-AUDIO
Yes
Figure A-4 - Upgrading System
System Update
Software Version
Upgrading System.
Installing Package
Page 77
Back
3.4-39
3.4-56
No
Back
Refresh
1.0.1