Table of Contents
Advertisement
CHAPTER 4: The eAMP1-S8-DA Web GUI
The self-contained eAMP1-S8-DA Web GUI allows you to customize the
configuration of the eAMP1-S8-DA to suit your needs. When the optional OPTe
package is purchased and added to the product, additional powerful features like
Loudness Measurement and Preset features are enabled, as described throughout
this chapter. Adding the OPTe Output Routing option also lets you configure what
input signals are routed to each output channel. If the default configuration suits
your needs and you prefer to use it that way, then you do not need to use the
eAMP1-S8-DA Web GUI.
The eAMP1-S8-DA Web GUI also allows you to have a remote view of the Meter
Screen. Refer to the Audio Meters section in this chapter.
Web Browser / Control Device
Any web browser application running on any networked device such as desktop or
laptop computer, tablet or smart phone can be used with the eAMP1-S8-DA Web
GUI.
Tablets with no network connector need to be linked to a copper LAN through a Wi-
Fi adapter.
Although they can be used, smart phones are not recommended because their
smaller screen size would require more scrolling, making operation challenging.
®
The Chrome
First Time IP Assignments
The eAMP1-S8-DA can operate with a static (fixed) or dynamic (DHCP) IPv4
address. The default address will be 169.254.1.x where x depends upon the MAC
address of the unit, when received from the factory or when switched from DHCP to
static addressing mode. There two basic types of connections that may be used to
connect the eAMP1-S8-DA to a web browser, a Peer-to-Peer Connection or a
Network Connection.
Peer-to-Peer Connection
The most straightforward way to connect the eAMP1-S8-DA to a web browser, free
of possible network conflicts, is to establish a static peer-to-peer connection
between the setup computer and the eAMP1-S8-DA. A 10/100/1000 MHz Ethernet
switch may be used in between, but is not required.
Figure 4-1 shows an example of suitable address settings for the host computer in
a Windows control panel. For Peer-to-Peer the IP address of windows should be in
169.254.1.x domain.
eAMP1-S8-DA
web browser is recommended for speed and compatibility.
Page 43
Advertisement
Table of Contents
