Table of Contents
Advertisement
CHAPTER 2: Local Operation
Operation
The eAMP1-S8-DA can be operated easily and simply from controls on its front
panel, as described in this chapter. It may also be accessed remotely via the
Wohler Web GUI for administrative purposes. The Wohler Web GUI is described in
Chapter 4 of this manual.
OPTe Package Upgrade
The optional licensed OPTe Package Upgrade provides a number of powerful
features beyond basic audio monitoring. The additional features are as follows:
Loudness Monitoring: Parameters relating to the setup of loudness
•
measurement can be set up and adjusted. The loudness of an input signal
can then be measured and displayed along with the input signal levels. Refer
to sections further in this chapter and to the System Preferences section of
Chapter 4.
Preset Management and Preset Replication: Presets are setups that
•
allow you to set up which channels of the various inputs are displayed on the
meters and in which order. Presets can then be quickly selected as needed.
These presets can be copied to other eAMP1-S8-DA units to simplify multiple
system setups. Refer to the Preset Management and Preset Replication
sections in Chapter 4.
Remote Meter Monitoring and Configuration: Related meter channels
•
may be grouped together and named for ease of monitoring. The meters may
be monitored via the Wohler Web GUI. Refer to the Dashboard section in
Chapter 4.
Passcode Protection: The settings of the eAMP1-S8-DA may be protected
•
from tampering or accidental changes. This is done using a Passcode. Refer
to the Passcode Settings section of this chapter or the Front Panel
Configuration Tab section in Chapter 4.
Application Programming Interface: The eAMP1-S8-DA may be
•
controlled by third party equipment via Application Programming Interface
(API) commands. These API commands are described in Appendix E.
An optional license key must be purchased to add the OPTe Package. Refer to the
System Setup section in Chapter 4 to install licenses.
OPTe Output Routing
The optional licensed OPTe Output Routing Upgrade provides the ability to route the
input signals to selected outputs of your choosing. Refer to the Global Output
Routing section in Chapter 4. An optional license key must be purchased to add
eAMP1-S8-DA
Page 9
Advertisement
Table of Contents
