Import/Export Presets; Export Configuration - Wohler eAMP1-S8-DA User Manual

Import/Export Presets

Use the Import / Export Presets page to manage the Preset database in the
eAMP1-S8-DA. You may export the Preset database onto the computer hard drive
for security backup purposes or as a means to transfer it to another eAMP1-S8-DA.
Likewise, it can be used to import a Preset database from the computer hard drive
into the eAMP1-S8-DA. In this way, a Preset configuration may be only devised
once and then duplicated into all of the eAMP1-S8-DA units in a system, saving
significant effort.
The eAMP1-S8-DA will create Preset Tags for the each set of Presets. Refer to
Figure 4-21. You may also change these Preset Tags, using the Preset Change
Field. They allow you to quickly resolve questions about which Presets on various
units are the most up to date. They will also allow you to determine whether
Presets have been modified. If the Preset Tag displayed contains the suffix "-dirty"
then at least one Preset has been changed in some way.
While exporting the file, the Preset Tag is appended to the filename, this allows you
to store multiple Preset files with different file name. For example, if the Preset Tag
is v1.0.0 then for eAMP1-S8-DA the default filename would be
eAMP1-S8-DA
red). However, you may change the Preset Tag to any number or text to suit your
requirements.

Export Configuration

Use the following steps to save the Preset configuration in the eAMP1-S8-DA to the
computer hard drive:
1. If you need to, revise the Preset Tag name, observing the advice in the
advice in the previous section.
2. Click the Export button on the Import / Export Presets page, as shown in
Figure 4-21.
eAMP1-S8-DA
-v1.0.0.pdb". Do not change the file suffix and prefix (marked in
Figure 4–21: Database Export
Page 69
"wohler_presets_