Import Configuration - Wohler eAMP1-S8-DA User Manual

3. A small Verify window will appear:
4. Click Yes to proceed with writing the Preset data to the hard drive. The
copying will proceed. After the Preset data has been written, a screen will
appear, explaining what has been exported in an Export Presets Summary. It
will also note whether there were any errors in the process. If there were any
errors, repeat these steps to try again.

Import Configuration

Use the following steps to copy the Preset configuration into the eAMP1-S8-DA:
1. Click the Browse button as shown in Figure 4-21 and select the Preset Tag
you would like to import.
2. If you want to allow existing Presets to be overwritten with imported Presets
of the same name, check the Overwrite an existing Preset box. It is a
good idea to do this.
3. Click the Import button. The copying will proceed. When complete, a screen
will appear, explaining what has been imported in an Import Presets
Summary. It will also note whether there were any errors in the process. If
there were any errors, repeat these steps to try again.
eAMP1-S8-DA
Page 70