Preset Replication - Wohler eAMP1-S8-DA User Manual

Preset Replication

Preset Replication is available if the OPTe Package is purchased. This feature allows
you to copy presets from a master eAMP1-S8-DA unit to other eAMP1-S8-DA units.
This can save a lot of setup time if multiple units all need basically the same setup.
To start Preset Replication, click on the Preset Replication tab on the master unit.
This will start the unit discovery process and will list all the eAMP1-S8-DA units that
you currently have on your network. The discovery process will continue for a
period of 2 minutes. However, you may stop the discovery process sooner if you
believe all the units in the network have been discovered. Simply click the Stop
Scan button.
Figure 4-19: Preset Replication Scanning Screen
Once all the units are discovered you may either copy the presets that are currently
created on the Master unit or can use an external preset file that you want to copy
to any or all of the Target units. Note that any and all of the Presets that may
already be contained in each Target unit will be erased by copying the new
Presets.
Page 67
eAMP1-S8-DA