How Do I Have A Downmixed Pre-Fade Output On Aes Pair-1 Combined With A Post-Fade Output On The Analog Xlrs; How Do I Make The Xlr Outputs Follow The Audio Meter Screen Solos & Mutes While The Aes Pair-1 Does Not - Wohler eAMP1-S8-DA User Manual

How do I have a downmixed pre-fade output on AES Pair-1
combined with a post-fade output on the Analog XLRs?
To downmix a pre-fade output on AES Pair-1, uncheck the Volume Control
checkbox for that AES pair. For a Post-fade output on the Analog XLRs, check
Volume Control checkbox.
How do I make the XLR outputs follow the Audio Meter screen
solos & mutes while the AES Pair-1 does not?
Make the settings shown in the Solo / Mute column:
The setting shown above determines that outputs will follow the Audio Meter screen
solos & mutes for the XLR outputs because the checkbox is checked. It is not
checked for the AES outputs, so they will not be affected by the solo & mute
choices.
Page 64
eAMP1-S8-DA