Preset Management - Wohler eAMP1-S8-DA User Manual

Preset Management

This feature is available if the OPTe Package is purchased. Presets are monitoring
configurations that can be composed of channels from multiple sources and
displayed on the meters in any order. Presets should be set up to allow operators to
quickly shift between setups for monitoring. The Preset Management screen
contains selections of all of the details for a Preset, and is largely arranged in a
matrix format connecting input channels to monitoring channels. The screen is
shown in Figure 4-15.
1. Preset Configuration: You may create a new Preset, adjust an existing
Preset, or create a new Preset from an existing Preset:
To create a new Preset, enter the name for the new Preset in the
•
field to the left of the word Preset. Then make all of the settings
needed and save it.
To make changes to an existing Preset, select it from the pull
•
down list, make the needed changes and save it.
To create a new Preset starting with an existing Preset, first
•
select the existing Preset from the pull down list. Next, enter the name
for the new Preset and save it. Then make the needed changes and
save it.
Presets may be created for any licensed inputs. Refer to the Licenses
section in this chapter to install software licenses.
2. System Clock Reference: There must be a system clock reference for
monitoring to take place. Select a reference from the pull down list. The best
choice is a stable, always present clock source locked to house sync. Second
to that, use the selected input as the clock. Generally speaking, Internal is
eAMP1-S8-DA
Figure 4–15: Configure Presets
Page 57