Table of Contents
Advertisement
The Global Output Routing tab is shown in Figure 4-17. This tab allows you
to determine exactly which input channels are routed to which outputs. This
very flexible capability allows you to route signals according to Preset or as a
default for the whole system. Refer to the Global Output Routing section in
this chapter to learn the function of each of the checkboxes and of the matrix
in this tab.
To set up a different input to output routing scheme for the Preset you are
creating, click the Global Output Routing tab and uncheck the Apply
Global Output Routing checkbox. You may then adjust the output routing
as you desire on this tab and it will only apply to this Preset.
10. When you have finished creating a Preset or making changes to a Preset,
either click the Save button to save the Preset, click the Save & Apply
button to save the Preset and make it the current Preset, or click the Reset
button to discard the changes just made. These selections are shown in
Figure 4-17.
eAMP1-S8-DA
Figure 4-17: Global Output Routing Preset Tab
Global Output Routing
Page 60
Advertisement
Table of Contents
