Local Update From The Front Panel - Wohler eAMP1-S8-DA User Manual

Local Update from the Front Panel

Use the following steps to update the eAMP1-S8-DA software:
1. Copy the unzipped Wohler Update Package file(s) from your computer to the
root directory (not inside of a folder) of a USB flash drive. It must be FAT32
file type, and does not need to be empty. Refer to the
Software
to the USB flash drive.
2. Insert the USB flash drive with eAMP1-S8-DA update package(s) into the
front panel USB jack.
3. From the Menu screen, touch System Options. The screen shown in Figure
A-1 will appear.
4. In the System Options menu, touch System Update. The Software
Upgrade screen will appear, as shown in Figure A-2.
5. The new software version that is in the flash drive will be shown in the
eAMP1-S8-DA
section of this chapter for the specifics of download and file transfer
Figure A-1 - System Options Screen
System Options
Network
Settings
System
Update
System
Details
Figure A-2 - Software Upgrade Screen
System Update
Software Version
Wohler eAMP1-S8-MDA
Page 76
Download the
Menu
System
Reboot
Factory
Reset
Passcode
Settings
Back
Refresh
1.0.1
1.0.1