Table of Contents
Advertisement
shown on the right image of Figure 2-34. Press Clear and try again.
When you have successfully entered the Passcode, the Passcode Settings screen
will appear, as shown in Figure 2-35.
The functions on this screen are as follows:
Restricted Access: This switch will turn ON or OFF protection or blocking of any
menus, except for the Passcode Settings menu, which is always Passcode
protected.
Set Passcode: Touching this button proceeds to a keypad which allows you to
enter a new Passcode. The screen shown in Figure 2-36 will appear. The Passcode
can be any 4-digit number. Touch Enter to save the new Passcode or touch Cancel
to keep the previous Passcode. Be sure to save the Passcode in a safe place for
future reference.
Type: Select the type of disabled button appearance using the Type button. The
choices are:
Passcode Access: The Passcode protected function buttons include a small
orange padlock icon within the buttons. This is shown in the left image of
Figure 2-37. Touching these buttons will cause a Passcode entry screen to
eAMP1-S8-DA
Figure 2-35: Passcode Settings Screen
Figure 2-36: Set Passcode Screen
Set Passcode
1
2
4
5
7
8
0
Page 38
3
Backspace
6
Clear
9
Cancel
Enter
Advertisement
Table of Contents
