Global Output Routing; Destination Outputs - Wohler eAMP1-S8-DA User Manual

Global Output Routing

The Global Output Routing feature is provided when the OPTe Output Routing
option is added to the OPTe Package. It allows channels to be routed or combined
and routed in custom ways to various destination outputs. Global Output Routing
is applied to:
1. Signals monitored using "Input Source select" from the Front Panel,
2. Presets that have been created to apply the Global Output Routing.
Any change to the routing will affect the Presets that have "Apply Global Output
Routing" selected.
Select Global Output Routing under Configuration. This will display the Global
Output Routing screen. This screen contains a matrix of checkboxes which are an
easy way for you to set up the wide variety of inputs to output routing and mixing
capabilities. The Global Output Routing screen is shown in Figure 4-18.

Destination Outputs

On the left of the Global Output Routing screen are listed the Destination
Outputs. These are the outputs to which any input can be routed. They are as
follows:
1. Speaker/Headphone: Selected inputs will be sent to the left and right
speakers. The default routing is set as per the Speaker Assignment, left
channels are sent to the left speaker and right channels are sent to Right
speaker.
eAMP1-S8-DA
Figure 4-18: Global Output Routing
Page 61