How Do I Ensure That The Outputs Are Automatically Muted When The Headphone Jack Is Inserted - Wohler eAMP1-S8-DA User Manual

speakers). Make sure that the Speaker Mix checkbox selection is unchecked for
Analog/XLR.
How do I ensure that the outputs are automatically muted when
the Headphone jack is inserted?
In the Global Output Routing configuration, if the Mute on Headphone
Insertion checkbox is ON then the outputs get automatically muted when a
headphone is inserted into the Headphone jack.
As shown below, if a headphone is inserted then the output on the Analog XLRs will
be muted, while the audio on AES Pair 1 will remain on.
How do I ensure that my outputs are pre-faded but follow the
solo-mutes on the web interface? This will allow us to monitor
only the unmuted/solo Audio Meter channels on amplified stereo
speakers connected to the Analog XLR's.
In the Output Routing setting, for the Analog XLR outputs, keep the Volume
Control checkbox unchecked and the Solo/Mute checkbox checked. This ensures
that the Volume Control is not applied to the outputs, while the Solos/Mutes are.
Page 66
eAMP1-S8-DA