Table of Contents
Advertisement
When you have successfully entered the Passcode, the Passcode Settings screen
will appear, as shown in Figure 4-13.
The functions on this screen are as follows:
Enable Restricted Access for Front Panel Configuration: This switch will turn
ON or OFF protection or blocking of any local product menus, except for the
Passcode Settings menu, which is always Passcode protected.
Passcode: You may enter a new Passcode in this field. The Passcode can be any 4-
digit number. Be sure to save the Passcode in a safe place for future reference.
Type: Select the type of disabled button appearance on the local product menus
using the Type button. The choices are:
Passcode Access: The Passcode protected function buttons include a small
orange padlock icon within the buttons. This is shown in the left image of
Figure 4-14. These buttons can only be accessed using the correct Passcode.
No Access: If the function buttons are protected by No Access, the buttons
are grayed out and non-functional, as shown in the right side of Figure 4-14.
These buttons cannot be accessed.
Apply Default: Clicking this button returns the settings in this screen to the
factory default values. The Passcode becomes 0-0-0-0.
Reset: Clicking this button undoes any settings you have made on this tab.
Enable / Disable Menu Access: This section provides a nested chart of the local
menus that exist in the product. You may set which menus are affected by
restrictions. Click any menu shown to change it between affected (red icon) and
unaffected (green icon).
Apply: When you have completed the desired settings in this tab, click Apply to
eAMP1-S8-DA
Figure 4-13: Front Panel Configuration Tab
Page 55
Advertisement
Table of Contents
