Table of Contents
Advertisement
2. Analog XLR: Selected inputs will be mixed to the left and right channels and
played through the two Analog XLR Outputs.
3. AES/Analog Pair-1: Selected inputs will be mixed to the left and right
channels and played through the AES Pair 1 and the Analog Pair 1 Outputs.
4. AES/Analog Pair-2: Selected inputs will be mixed to the left and right
channels and played through the AES Pair 2 and the Analog Pair 2 Outputs.
5. AES/Analog Pair-3: Selected inputs will be mixed to the left and right
channels and played through the AES Pair 3 and the Analog Pair 3 Outputs.
6. AES/Analog Pair-4: Selected inputs will be mixed to the left and right
channels and played through the AES Pair 4 and the Analog Pair 4 Outputs.
The four AES outputs can be used together to output, for example, 5.1 or 7.1
surround channels to an external surround sound monitor system.
Source Inputs
The source inputs which may be routed are described in this section.
1. Cluster Information: Cluster information show type of cluster and cluster
name.
2. Speaker Assignment: Speaker assignment can be used to configure to
which speakers the audio is routed to. The possible options are:
Left
L
Right
R
Center
C
Low Frequency Effects
LFE
Left Surround
Ls
Right Surround
Rs
Back Surround Left
Bsl
Back Surround Right
Bsr
Mono Surround
S
3. Input/Output Matrix: By checking the various boxes in this matrix, any
input channels can be freely routed to any output channels. This flexible
channel assignment is called a Free Mix. However, when the Speaker Mix
box is checked in the Output Options section, the associated row within the
matrix is automatically set to the speaker mix and the checkboxes are
grayed out indicating that you may not change them with a Free Mix
assignment.
Output Options
The optional settings in this section allow for customization.
1. Speaker Mix: This option selects whether an output has the Speaker Mix
or a Free Mix as set in the Routing Input section. The Speaker/Headphone
output is always in the Speaker Mix.
2. Solo/Mute: This setting determines whether or not the outputs are affected
eAMP1-S8-DA
Page 62
Advertisement
Table of Contents
