Night/Day Service - Mitel SX-5 Manual

SECTION MITL9103-098-105-NA
NightlDay Service
Description
This feature allows incoming trunk calls to be routed to preselected extensions or Ring
Groups when the system is placed in either Day or Night Service by the Control
Extension. The assignment of extensions or Ring Groups to which calls are to be
routed may be made by the Control Extension at any time. Refer to Common Audible
Ringing.
Conditions
None
Feature Selection
To Select Day Service:
Lift the Control Extension handset
-
dial tone is returned
Dial 312
-
acknowledge tone is returned.
Replace the handset
-
Day Ring Groups
1
and 2 are enabled.
To Select Night Service:
Lift the Control Extension handset
-
dial tone is returned.
Dial 313
-
acknowledge tone is returned.
Replace the handset
-
Night Ring Groups 1 and 2 are enabled
NOR Acknowledge tone may be one of two tones; they are:
One beep none 1). indicates that the new feature access code has been
accepted.
Two beeps (Tone 2). indicates that the feature was already selected
The relevant tone is repeated three times. Reorder tone will be received
when the dialed code is invalid.
Page 36