Default Data - Mitel SX-5 Manual

SECTION MITL9103-098-105-NA
Default Data
Description
The SX-5 contains a default program with a fully operational customer feature
package. The default data contained in the program reflects the customer's typical
requirements. Specific requirements may be programmed as detailed in the Prograrn-
ming feature description. The system default data is listed in Table 3.
Conditions
All systems have default data loaded automatically on initial power-up.
Feature Selection
To Reload the Default Data:
Set SW2 to CLOSED.
Press Reset Switch
-
status
LED
flashes.
Set SW2 to OPEN within 8 s of the status LED starting to flash
-
status
LED
glows permanently.
Set SW2 to CLOSED.
Defauit data is reloaded
Operation
None
Page 20