Direct-In Lines - Mitel SX-5 Manual

SECTION MITL9103-098 -105-NA
Direct-In Lines
Description
This feature allows one extension to be used as a private line. Incoming trunk calls to
the selected extension will ring that extension only.
Conditions
The extension designated as a private line must represent the main extension
of a Ring Group. The selected Ring Group must comprise that main extension
only. Refer to Cammon Audible Ringing.
-
Feature Selection
To Assign a Direct-In Line:
Set SW2 to
OPEN.
Lift Control Extension handset
-
dial tone is returned.
Dial 301 (i.e. Remove ALL auxiliary members from both Ring Groups).
Dial 33AB5X where
A
=
1
for
trunk
1
assignment
=
2 for trunk 2 assignment
B
=
3 if day Ring Groups are in use
-
=
4 if night Ring Groups are in use
X
=
the Equipment Number of the direct-in-line extension
Replace handset
Set
SW2
to
CLOSED.
Reassign remainder of Ring Groups as desired. Refer to Common Audible
Ringing within this practice.
NOR
The Equipment Number
(EN)
of an extension is defined as the second digit of
the Extension Number, i . e. the
EN of extension 23 is 3 .
Operation
None
Page 24