Flexible Night Service Setup - Mitel SX-200 Manual

SECTION MITL9109-094-315-NA
TRUNK 72
Currently to 1251
q F1 >EXIT
Page 28
CANCEL ALL CALL FORWARDING/CALLBACK: The CANCEL ALL CALL
FORWARDING and CANCEL ALL CALLBACK functions are accessed by
the following key sequence:
FUNCTION + ATT. FUNCTION + MORE + CAN. ALL FWD (or CAN. ALL
CBK)
Pressing CAN. ALL FWD will clear all call forwarding; pressing CAN. ALL
CBK will clear all callbacks.
the Access Code required for a call originating outside the PABX to
access the PABX's
code is set up by the following sequence:
FUNCTION + ATT. FUNCTION + MORE + DISA CODE
The display then prompts for the DISA Access Code, and the softkeys
SET and EXIT are displayed. Pressing SET enters the new Access Code
into the system. Pressing EXIT returns the display to its normal call
handling mode.
FLEXIBLE NIGHT SERVICE: Flexible night service allows the Attendant
to redefine the inward routing of non-dial-in trunks. This permits the
routing for NIGHT1 and NIGHT2 to be changed. Access to this function
is gained by the following sequence:
FUNCTION + ATT. FUNCTION + MORE + FLEX NIGHT
The display then prompts for trunk number. The trunk number is keyed
in, followed by selecting NIGHT1 or .NIGHT2, and the new destination.
Pressing the SET key will cause the routing to be changed. The routing
destination may be a
Attendant Console LDN or an LDN appearance on an Attendant Con-
sole. It may also be a night bell directory number.
COS 49 COR 15
q
q F2>SET
q
F7>
Figure 3-42 Flexible Night Service Setup
features (Direct Inward System Access). The DISA
Forward to:1 108-
q
F4>
allows the Attendant to redefine
telephone, a SUPERSET line, an
q
F5>