System (Generic 50); Introduction; Sx-5 Documentation; Shipping And Receiving - Mitel SX-5 Manual

SECTION
MITL9103-098 -200-NA
TABLE
1-1
SX-5 DOCUMENTATION
1 . INTRODUCTION
SECTION
MITL9 103-098- 100-NA
MITL~ 103-098- 1 05-NA
M m 9 103-098- 150-NA
MiTL9 1 03-098- 1 80-NA
MITl.9 103-098-200-NA
Mm91U3-098-205-NA
MlTL9103-098-320-NA
Mm9103-098-350-NA
Gensral
TITLE
General Description
Features and Services Description
Ordering lnf ormation
Engneering lnf onnation
Shipping, Receiving. and lnstallatlon Procedures
Programming
Extension Test Procedures
Maintenance and Troubleshooting
1.01
This section contains a detailed description
of the shipping, receiving and installation
procedwes for the SX-5 Communications
System Part 2 details the shipping and receiving
of the SX-5, and Part 3 the delivery check,
which includes the unpacking and inspection of
the items delivered The installation requirements
are detailed in Part
4.
and the cabling and cross-
connections in Part
5. Part 6 gives a synopsis of
the detailed installation instructions found in Ap-
pendix
2
Documentation
1.02
Table 1-1 lists all M 5 practices
as-
sociated with the SX-5 Communications
System
2 SHIPPING
AND RECEIVING
WARNING:
Caution is necessary when hand-
ling electronic equipment such as the SX-3, to
avoid possible damage to
the
system eiec-
tronics by static discharge. A simple means of
avoiding the possibility of such damage is the
use
of a "Static Protection Wrist Strap" at-
tached to one cabinet hinge. If difficulty
i s
experienced in obtaining me wrist strap con-
tact your nearest MllR. Customer Servicm re-
p r u e r m t i v a
Introduction
201
The SX-5 is shipped fully equipped in a
single carton (Fig
2-
1). If a large number
of systems are to be shipped to one location. 20
systems are packaged in a single shipping con-
tainer.
System Packaging
2 0 2
The equipment cabinet is shipped with all
electronic assemblies in position The
cabinet is enclosed in an anti-static bag and sup-
ported with a shock-absorbant materid The
system docurnentation and mounting template are
packaged in the same container as the equipment
cabinet The simpping container consists of a
cornpleteiy enclosed tri-wall carton During tran-
sportation the carton is held closed by two nylon
shipping straps. The total weight of a complete
system including packaging is approximately 1
2
Ibs (5.5 kg).
Page 2