Clear Function - Mitel SX-5 Manual

Clear Function
SECTION
MITL9103-098-105-NA
Description
This special control function allows the Control Extension user to clear large amounts
of data from the customer data base in order that new customer data may be entered.
Conditions
*
The clear function may only be used with the functions listed in Table 1.
Feature Selection
None
Operation
To clear a function:
Lift the Control Extension handset
-
dial tone is returned.
Dial the required 3- or 4-digit code specified in Table
1
-
acknowledge tone is
returned.
Replace handset
-
the function is cleared.
NOTE:
Acknowledge tone may be one of two tones; they are:
One beep Clone I), indicates that the new feature access code has been
accepted.
Two beeps none 2). indicates that the feature was already selected.
The relevant tone is repeated three times. Reorder tone will be received
when the dialed code is invalid.
Table 1
Clear Function
Page 13
Code
30 12
30 13
30 14
3015
3023
3024
303
304
305x
Clear
Function
Remove all auxiliary members from Day Service Ring
Group 1
Remove all auxiliary members from Night Service Ring
Group
1
Remove all auxiliary members from Day Service Ring
Group
2
Remove all auxiliary members from Night Service Ring
Group
2
Remove all members from Pick-Up Group 1
Remove all members f r o m Pick-Up Group
2
Clear all active Call Forwarding
-
All Call requests
Clear all active Call Forwarding
-
Busy requests
Remove speed call number x Ix=1-9) f r o m the system
memory