Trunk Camp-On; Chart; Voice Paging 1 - Mitel SX-5 Manual

SECTION MITL9103 -098-320-NA
CHART 1 2
TRUNK CAMP-ON
STEP ACTION VERIFICATION
To set-up Trunk Camp-on:
1
Establish an extension-to-extension call.
2 Establish an incoming trunk call to
Incoming trunk receives ringback tone.
a ring group that includes one
The called extension receives one
o f the busy extensions.
tone burst indicating that an incoming
call is waiting
3 Called extension goes on-hook Called extension rings and trunk
..
receives ringback tone.
4 Called extension lifts handset
Incoming trunk and called extension are
connected
CHART 1 3
VOICE PAGING
STEP
ACTION VERIFICATION
1 Lift handset Dial tone is returned
2
Dial 6 1 (Paging access code).
When the warning tone is heard, the
extension is connected to the paging
equipment and the user may make an
announcement
3 Go on-hook
-
Page 11