Extension Switchhook Flash Timing - Mitel SX-5 Manual

SECTION MITL9103-098 -105-NA
Extension Switchhook
Flash Timing
Description
Switchhook flash is the term given to the action of depressing and quickly releasing
the telephone switchhook. This feature defines the maximum duration of a switchhook
flash. Some users experience difficulty in performing a switchhook flash when the
maximum duration is set to 750 ms (314 s). To accommodate these users i t is
possible to define ihe switchhook flash time to accept flashes of up to 1500 ms (1
112 s). Thus a user holding the cradle down for
1
s will no longer hang-up on the call.
For a more detailed description of a Switchhook Flash refer to Switchhook Flash in this
practice.
Feature Selection
To Set Switchhook Flash Timing
Lift the Control Extension handset
-
dial tone is returned.
Dial 417A where
A
=
1 for a flash timer of between 150 ms and 750 ms
A
=
2 for a flash timer of between 150 ms and 1500 ms
A
=
3 for flash to mean call release
Acknowledge tone is returned.
Replace the handset
-
the Switchhook Flash Timing is defined.
NOTE:
Acknowledge tone may be one of two tones: they are:
One beep (Tone 1). indicates that the new feature access code has been
accepted.
Two beeps (Tone
21,
indicates that the feature was already selected.
The relevant tone is repeated three times. Reorder tone will be received
when the dialed code is invalid.
Operation
Automatic
Page 29