Last Number Redial - Mitel SX-5 Manual

SECTION MITL9103-098-105-NA
Last Number Redial
Description
This feature allows the last number dialed at each extension to be stored and later
redialed automatically, upon request from the associated extension. The request is in
the form of a 2-digit Last Number Redial access code.
Conditions
Only the last valid trunk call number will be redialed, and then only if it was
the last number dialed from the extension.
Wait for Dial Tone (min. 5 s) feature must be programmed.
Feature Selection
Program a Wait for Dial Tone of 5 s minimum. Refer to Wait for Dial Tone in this
practice.
Operation
To Select Last Number Redial:
Lift handset
-
dial tone is returned
Dial Last Number Redial access code; i . e. 20 when extension numbering plan is
11-16, 10 when extension numbering plan is 21-26.
Page 3 l