Flexible Sip Header Configuration To Sip Trunk Provider; Restricted Cli In Sip Header; Display Only Caller Identification Instead Of Transfer Information; Alternate Lamp Indication On Phone/ Pkm Keys - Mitel MiVoice Office 250 Installation And Administration Manual

• To configure an IP/ Digital Phone as a destination for Direct Page the phone must be assigned
to a Paging Zone, which has the Use zone for Direct Page option enabled. This is disabled by
default.
• A Direct Page is then activated by dialing 7 (Default Feature Code for Paging), followed by the
configured Paging Zone, and then the extension number of the phone you want to Direct Page.
• Direct Page can only be activated by Phones that have the Initiate Direct Page flag set to Yes.
• Analog and SIP phones cannot receive a Direct Page, but can initiate a Direct Page to an IP/
Digital Phone.

Flexible SIP Header Configuration to SIP Trunk Provider

There are new fields available in the SIP Trunk Group configuration that allows to define which Caller
ID information is sent to the SIP provider.

Restricted CLI in SIP Header

The caller identification can be withheld within the SIP header.

Display only Caller Identification instead of Transfer Information

A new Phone flag allows you to suppress transfer information and instead display caller identification
and name when the incoming call is ringing.

Alternate Lamp Indication on Phone/ PKM Keys

Previously, MiVoice Office 250 lamp indication used three flashing rhythms (ringing: quick, hold from
yourself: moderate, everything else: slow). A new system flag Use alternate key lamp indication
for Phone status allows a clearer difference (ringing: slow, hold from anyone: moderate, active
calls: continuously lit).

Release Key

Actual desktop phones on MiVoice Office 250 do not have the old "infinity key" to release a call with
a simple keyclick. For example, a receptionist with a headset still had to use the hook in the cradle
of the desktop phone to release calls. Now it is possible to configure the release call functionality
on any phone key. The configuration can also be defined by the user in the User Web Portal (UWP).

Notification of no Primary or Local Attendant Configured

The Primary or local Attendant is important to system behavior. When a user unintentionally removes
these from the Database configuration, a warning message appears.

SSL Certificate

You can generate Certificate Signing Request and Upload SSL Certificate settings to create a
CSR request and upload customer's own certificate on the system.
MiVoice Office 250 New Features
7