Table of Contents
Advertisement
CAUTION
Do not use the battery with devices other than the corre-
sponding transmitter.
Do not place heavy objects on top of the battery or charger.
Also, do not place the battery or charger in any location where it
may fall.
■ Doing so may cause damage or injury.
Do not store or use the battery and charger where it is dusty
or humid.
■ Insert the power cord plug into the receptacle only after eliminating the
dust.
microSD Card (Commercial Product) Handling Precautions
WARNING
Never disassemble or modify the microSD card.
Do not bend, drop, scratch or place heavy objects on the mi-
croSD card.
If smoke or an abnormal odor emanates from the card, immedi-
ately turn off the transmitter power.
CAUTION
Since the microSD card is an electronic device, be careful of
static electricity.
■ Static electricity may cause erroneous operation or other trouble.
Do not use the microSD card near radio and television sets,
audio equipment, motors and other equipment that generates
noise.
■ Doing so may cause erroneous operation.
Do not store the microSD card in the following places:
・ Where the humidity is high
・ Where the temperature difference is severe
・ Where it is very dusty
・ Where the card will be exposed to shock and vibration
・ Near speakers and other magnetic devices
Storage and Disposal Precautions
WARNING
Keep wireless equipment, batteries, aircraft, etc. away from
children.
CAUTION
Do not store wireless devices in the following places:
・ Where it is extremely hot (40℃ [104 ℉ ] or higher) or cold (-10℃ [14 ℉ ] or
lower)
・ Where the equipment will be exposed to direct sunlight
・ Where the humidity is high
・ Where vibration is prevalent
・ Where it is very dusty
・ Where the device may be exposed to steam and heat
Other Precautions
CAUTION
Do not directly expose plastic parts to fuel, oil, exhaust gas, etc.
■ If left in such an environment, the plastic may be damaged.
■ Since the metal parts of the case may corrode, always keep them clean.
Join the Academy of Model Aeronautics.
■ The Academy of Model Aeronautics (AMA) provides guidelines and liability
protection should the need arise.
9
After the transmitter has been used for a long time, the battery
may become hot. Immediately remove it from the transmitter.
■ Not doing so may cause a burn.
Do not charge the battery in extreme temperatures.
■ Doing so will degrade the battery performance. An ambient temperature
of 10℃ to 30℃ (50 ℉ to 86 ℉ ) is ideal for charging.
Unplug the charger when not in use.
Do not bend or pull the cord unreasonably and do not place
heavy objects on the cord.
■ The power cord may be damaged and cause combustion, generation of
heat, or electric shock.
Do not use the microSD card where it may be exposed to wa-
ter, chemicals, oil, or other fluids.
■ Doing so may cause a fire or electric shock by short circuiting.
Do not insert foreign matter into the transmitter card slot.
■ Doing so may cause erroneous operation.
Do not expose the card to shock and vibration and do not re-
move the card from the card slot while data is being written or read.
■ The data may be damaged or lost.
● Recorded data
The data recorded on the microSD card cannot be compensated
regardless of the contents or cause of the trouble or obstruction.
Futaba does not perform data restoration or recovery work.
When the device will not be used for a long time, remove the bat-
teries from the transmitter and aircraft and store them in a dry place
where the temperature is between 0℃ and 30℃ [32 ℉ and 86 ℉ ].
■ Leaving batteries inside your model and radio when they are not being
used for long periods will result in battery deterioration, liquid leakage and
other damage.
Always use genuine Futaba products such as transmitter, re-
ceiver, servo, ESC, battery, etc.
■ Futaba is not responsible for damage sustained by combination with parts
other than Futaba Genuine Parts. Use the parts specified in the instruction
manual and catalog.
Advertisement
Table of Contents
