Table of Contents
Advertisement
This function adjusts the pitch operation curve for each
movement of the throttle stick.
The pitch curve can be freely selected from linear operation curve to
smooth curve, and adjusted to match the curve you want by means
curves can be selected). Up to 17 points can be set for linear or
the setup screen shown below.
conditions or the pitch and throttle curves can be
displayed on one screen.
tuned.
Normal curve adjustment
create a basic pitch curve centered about
curve so that up/down control is best at a
Idle up curve adjustment
maximum pitch which does not apply a
Note:
reset.
Throttle hold curve adjustment
＜ Model Menu (Helicopter) ＞
179
create a
to
curve, a simple and smooth curve can be created by
selecting the curve type and reducing the number of input points to
points that you created. A curve, a simple and smooth curve can
be created by selecting the curve type and reducing the number of
corresponding points that you created.
pitch.
Operation precautions
WARNING
always set the idle up condition switch to
[OFF] and start the engine in the idling state.
Separate.
Advertisement
Table of Contents
