1
1. Select "Gyro setting" on the last page of
Helicopter Model Menu
2
2. Select "Start"
3
3. Home screen is displayed
◆ When copying data from Gyro A to Gyro B
Connect the gyro A to the T32MZ-WC and press [Start]. (Enter the data of A into T32MZ-
If you press Start here, the B data will be written
to the T32MZ-WC and the A data will be lost.
Connect Gyro B to T32MZ-WC and press [GY Settings Transfer]. (Put data on A into gyro B)
< Model Menu (Helicopter) >
195
SETTING
A. Wired connection: Advanced settings
When "GY Settings Transfer" is
selected, the gyro setting data saved
in T32MZ-WC is written to the gyro.
Select "Start" This will download
the gyro data to the T32MZ-WC.
To basic menu
To expert menu
To receiver
CAUTION
Be sure to connect and disconnect the CGY760R/CGY755 and
T32MZ-WC connection cable with the power off.
* At this time, if Gyro is not connected to T32MZ-WC by wire, the
EQ ID screen appears.
WC)