Table of Contents
Advertisement
Compatibility of FASSTest26CH with receivers：
FASSTest26CH compatible receivers
● R7208SB/R7308SB (V2.0~)
● R7206SB/R7306SB (V1.0~)
● R7214SB/R7314SB (V1.0~)
About FASSTest26CH S.BUS2 connect and servos：
When using the following servos with the FASSTest26CH system S.BUS2
connect , it is necessary to software version up the servos.
HPS-A703
HPS-AA702
HPS-HC701
HPS-HT700
HPS-H701
Servos other than those listed here can be used as is.
Updating requires a PC that can connect to the Internet and Futaba CIU-3.
Refer to Futaba homepage for update software and update method.
The FASSTest 26CH mode is a new system that is ideal for those who need more
channels, such as on large models. When using a conventional system (T-FHSS,
FASSTest18CH, etc.), the above servos can be used as is without updating.
FASSTest 26CH and PWM connections do not require servos updates.
41
(Serial number less than 22597)
(Serial number less than 20372)
(Serial number less than 10910)
(Serial number less than 10730)
(Serial number less than 10361)
https://www.rc.futaba.co.jp
https://futabausa.com
*FASSTest26CH cannot be used with
receivers other than compatible models.
Serial number
Advertisement
Table of Contents
